Universal Applications
The 3412 series drop-bolt can be used on single
acting inswing or outswing doors or double acting
doors. These units provide reliable locking
without the difficulties encountered with “shear”
locks.
Suitable for some glass doors
Electric drop-bolts can be installed on all glass
frameless doors utilizing the U-bracket. A
variety of door applications are possible with the
wide selection of mounting brackets.
Automatic Alignment Sensor
Unique intelligent logic circuit keeps the drop-bolt
retracted until the door has been closed and is
properly aligned to assure engagement of the lock
bolt. The door position sensor mounted on the
strike plate will work with a door gap of up to 3/16”
and is fully adjustable to ensure correct operation
in spite of poor door and frame alignment. The
mechanical alignment ball on the face plate of the
lock is adjustable over a wide range to
compensate for excessive door gap and to
improve accuracy. The door position sensor is
disabled after the bolt is engaged to increase
security.
Field Adjustable Timed Relock
The time delayed relock (time between door being
closed and the bolt engaging) is selectable for up
to 9 seconds by Dip Switch settings. A normally
closed contact controls the lock bolt activation.
Low Current Draw
The drop-bolt requires less than 1 amp to extend
and engage and draws only 0.3 amps in the
holding mode. This design conserves power and
extends the life of the drop-bolt
Requires 12 vdc power.
Please note that this is a fail safe lock meaning that to remain locked it needs to be powered on. Always check with your local fire authority before installing.
Related Products
Fingerprint readers
Card readers
Digital keypad system
Chip Reader
Proximity card Reader
Multi Door Proximity Access Control
Receptionist unlock button
Wireless Electric strike controller
Knocklock (Great for hidden doors)
See the book: The Guide to Electronic Locking DevicesDon't forget the power supply!
Go here
Or a power supply with back up battery system
Go here
3610-B