Weatherproof - But should be sheltered
The ENTRACOMP® 26SA card access control unit utilizes state of the art electronics in
providing a product that is both inexpensive and fully programmable. The patented slotless
TOUCH CARD® reader is protected from weather and vandalism. Simply place the card on the
stainless steel touch plate, and the card is read instantly and errorlessly. A green light indicates
that access has been granted.
Because the ENTRACOMP® 26SA has non-volatile memory, reprogramming after a power loss
is a thing of the past. Validating and voiding of cards, as well as other programming functions,
are easily accomplished from outside the unit using a few programming cards. The Lexan® or
metal surface models easily mount to a single gang electrical box, masonry wall, post, or almost
any surface. The ENTRACOMP® 26SA operates on low voltage AC or DC, and consumes
less than 200 milliamps.
Features:
3500 CARD CAPACITY
Weather Resistant For Outdoor Installation
PATENTED SLOTLESS TOUCH CARD®
TECHNOLOGY
TIMED ANTIPASSBACK
NO CONTROL PANELS OR SECONDARY ELECTRONICS
EXTREMELY EASY TO INSTALL
LOW POWER CONSUMPTION
NON-VOLATILE MEMORY
VERY RELIABLE
Note: Unlike some of the other readers we sell this unit does not use regular credit cards. These are special cards only available for this type of reader.
Specifications :
OUTPUTS: - Latch & Alarm Shunt - DPDT contact, 3A, up to 277 VAC or 30 VDC
Operating temp: -40o F to 158o F (-40o C to 70o C)
Memory: EE prom - non volatile
Card capacity: 3500 Cards (1750 with timed antipassback)
Facility Code: Up to 3 different codes simultaneously
Latch/Alarm Shunt Timer: programmable from 1 to 30 seconds
Related Products
See our electric strike and magnetic lock section
See our electric lock section
Don't forget the power supply! Click here for power supply with battery back-up
Note: This unit is programmed only with special programming cards and these cards are sold separately but included with
each pack of extra reader cards - see below to order