Apollo Stand Alone Mag-Stripe Card /Keypad Access System

The AP-530 is a bright new concept in low cost, single door, stand-alone access control. The AP-530 provides complete time zone control of access with its battery-backed real time clock, and provides a printer output for event logging and configuration output, via its RS-232 serial interface. No programming cards, as used on other low cost stand-alone readers, are required. All AP-530 programming is performed via its integral 12 position keypad.




Features:

Wide input voltage range (+6 to +24 Vdc)

Low power/surface mount/1 million pass read head

Small, rugged, die cast aluminum (mullion mount)

Complete array of coordinated mounting hardware

Mounts with security screw/tamper switch

Attractive, weatherized finish

3 LEDs for access and reader status

12 position keypad with audible feedback

Real time clock with battery back-up

RS-232 printer interface

Bi-directional swipe

Supports credit cards or Apollo supplied high coercivity magnetic stripe cards - see below to order mag stripe cards

1000 sequential/100 random or credit cards

4 time zones/7 access levels/20 Holidays

Anti passback feature includedfor more security

Monitors and reports reader tamper/door alarm

Output for door strike/output for auxiliary use

Non-volatile memory for card/PIN storage

Installs with plug-in connectors


Operation: The AP-530 has 4 inputs and 2 outputs. It monitors door contact, exit push-button, reader tamper and auxiliary alarm zone, and outputs control lines for the electric door strike and an auxiliary output. The aux output can be used for a local door alarm, to arm/disarm a separate alarm system, or for any other output functions. The AP-530 can limit access by time of day, day of week and provides up to 20 holidays that can override the day of week. Reader mode (card only, card/PIN, card and PIN, facility codes, locked, unlocked) can be controlled by time.



M 1 format


Specifications:
Dimensions: 5.6"L x 1.98"W x 1.5"H (14.2 x 5 x 3.8 cm)
Weight: 0.4 lb. (0.18 kg)
Operating Temperature Range: -40 to +85º C (-40 to +185º F)
Humidity Range: 0 to 95%, non-condensing
Finish: die-cast aluminum
Power Requirements: +6 to +24Vdc @ 25mA

Related Products
See our electric strike section
See our electric lock section
See our exit button section
See the book: The Guide to Electronic Locksmithing for installation hints

Don't forget the power supply! Click here for power supply with battery back-up