Kaba 5000 Heavy Duty Mechanical Pushbutton Lever Lock

No battery needed for these locks!



The new American made Kaba Simplex 5000 has been designed for the simplest installation possible. The lock is shipped preassembled as two fully contained front and rear housings. It’s non-handed, and the lever hand can be changed in seconds. It installs easily on wood or metal doors from 1 3/8" to 2 1/4" in thickness, or 35mm to 57mm. In addition, it fits standard 161 Cylindrical Lock door prep with only minor modifications; retrofits cylindrical locksets with 2 3/4" (70mm) backset; and covers existing Kaba Ilco 1000, L1000 and PowerLever installations.

Since it features a direct - drive design, there is no need for a clutch mechanism. This decreases the possibility of internal breakage and the subsequent linkage repairs. And with a fully independent lever, there’s less chance of damage from abuse. Using the Simplex 5000 couldn’t be easier. You just punch in the correct code and press "ENTER." The ADA-compliant lever requires only a 45-degree turn in either direction. The code that opens the door can be easily changed to one of thousands of possible combinations, without removing the lock—eliminating the cost of cutting new keys. And since it is mechanical, there are no batteries to maintain or replace.

Handing is reversible

Comes standard with a regular key cylinder for key backup at no extra charge. Special high security restricted keyway.

Very heavy duty grade one

No batteries needed - completely mechanical

3 year warranty!

A combination card is also included to help users keep track of their codes, and a surround card lets you place operating instructions on the door itself. You can also reach our Support Team via telephone.

Installation: Easily installs on wood or metal doors. ASA 161 door prep with two additional through bore holes. Retrofits cylindrical and tubular locksets with a 2-3/4" backset.

Door Handing: Non-handed, preassembled for left-hand door installations - can be easily changed in the field



From its packaging to its warranty, the Simplex 5000 takes customer support to a new level. The lock is packaged with fewer parts to assemble. That means less time, and less confusion at installation. The owner’s manual is also built for speed, with more illustrations and diagrams than manuals for other a quick read, as thorough and helpful as possible, covering both the installation and operation of your Simplex 5000, in three languages. Kaba seems to be really serious about helping the end user. So far we have heard customer service has been great!

This lock comes free with a special restricted type cylinder - A Lori 90 1614 (for added security) but these keys can be cut on a regular key machine) and the keys for key back-up. It also comes with the tail pieces to use with the following type of cylinders if you need to key your new lock into an existing system:

Abloy 5277 - 5477
Assa 65691
Kaba Ilco 15395
Assa Australian 65611
Corbin Russwin 2000-03
Kaba Ilco 1599
Schlage C
Schlage 23-001
Schlage Primus 20-760
Medeco 20w200h1
Arrow c100
Sargent 10 line
Marks

See some of the cylinders, in the options area below, that we can supply with this lock.

Please note: If your installing this lock on a gate you can order a special gate box made just for this lock. See for gate mounting or order by checking box in options

Strike: ASA strike plate
Backset: 2-3/4" (70mm)
Will work with door thickness: 1-3/8" (35mm) to 2-1/4" (57mm)
Preassembled to accommodate doors 1-5/8" to 2" (41 to 51mm)


Size:
Outside: 8 3/4 inches long X 3 1/4 inches wide x 1 3/4 inches deep
Inside: 8 1/2 inches long x 3 1/8 inches wide x 1/2 deep (plate only)

1664