Camden Thin Exit Switch

This low profile, jamb mount, handicap switch uses our proprietary patented technology and needs no internal or external power source to function. This means that there are no batteries to replace and no extra wiring to install. This new switch will replace a mechanical, normally open, momentary switch. There are no switch contacts to wear out because it is electronic.

As with all of our products, this switch has been designed for ease of installation. The attractive stainless steel push plate is rugged and requires minimum movement to activate. This switch is surface mount with the electronics mounted inside the switch on the back plate. Two screws and a hole for the wires are all that’s needed for installation. The switch will also fit on a standard electrical box with a cover plate.

•Actuation force: 2 lbs
•Maximum resistance when ON: 1 Ohm
•Maximum current through the switch: 1A
•Maximum operating voltage: 55VDC or 40VAC
•Operating condition: dry or wet
•Operating temperature range: -40 to 140F (-40 to +60C)
•Contact type: momentary
•Minimum travel path for actuation: 1/16 inch


Dimensions: 4 X 1 5/8 X 3/8 inches